Page 16
Sliding Body Shelves
The sliding body shelves can be removed by
lifting them up slightly from the front and the
shelves can then be moved back and forth.
There are 2 stop points, the first allows for
the shelf to be pulled to a certain point in
order that foods placed at the back of the
shelf may be easily accessed; when the
shelf is pulled and slightly lifted upwards
when it reaches the second stop point, the
body shelf will be released.
The shelf should be held firmly from the
bottom in order to prevent the shelf from
tipping over.
The body shelf is held in place by the rails
on the sides of the refrigerator body.
The shelf may be placed on one of the lower
or upper level rails as required. The body
shelf should be pushed backwards gently
until it is completely seated.
Chiller compartment
Chiller compartments enable foods intended
to be frozen become prepared for freezing.
You can also use these compartments to
store food at a temperature a few degrees
below the fridge compartment.
You can increase the inner volume of your
refrigerator by removing any of the chiller
compartments.
To do this, simply pull the compartment
towards yourself; the compartment will stop
when it reaches the stopper.
The compartment will be released when you
lift it about 1 cm and pull it towards yourself.
7
