5. Positionthehandlebarasshown,
ensuringthehandlebarisposi-
tionedonthehandlebarclampbe-
tweenthearrowsonthehandlebar
decal.
6. Retightenhandlebarbyturning
clampknobclockwiseuntilhandle-
barissecureandstationaryin
clamp(clampknobcannotbeover-
tightened).
KNOW YOUR EDGER ATTACHMENT
READTHIS INSTRUCTIONMANUALAND SAFETY RULES BEFOREOPERATINGYOUR
EDGERATTACHMENT. Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual
for future reference.
Depth Adjustment Knob
Gearbox
Wheel
Tube
J
Hanger
Blade Shield
BLADE
The BLADE is designed to cut sod.
Edger Blade
DEPTH ADJUSTMENT KNOB
The DEPTH ADJUSTMENT KNOB is
usedtoa_ustthe wheel_rbladecut-
tingdepth.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach-
ments to be installed. The optional
attachments are:
Cultivator ............ 358.792410
Blower .............. 358.792421
Brushcutter .......... 358.792441
I_ WARNING: Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal-
ling attachments, place the power-
head and attachment on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
UpperTube
Coupler
Lower
Attachment
TIGHTEN Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
/
LowerAttachment
Upper Tube
3. While securely holding the upper
tube, pull the attachment straight
out of the coupler.
7
