10
11
Step 5 - Safety Cable
For added security, attach safety cable from fan unit to "J" hook (S7)
in outlet box. Secure by looping zip tie (S8) through safety cable and
"J" hook. Tighten zip tie securely. Lift fan onto the mounting bracket
(#1). Turn housing until hanging ball seats itself into ball socket (listen
for click).
9
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount so outlet box
marked "acceptable for fan support" and use mounting screws provided with the
outlet box. Most outlet boxes commonly used for the support of lighting fixtures
are not acceptable for fan support and may need to be replaced. Consult a
qualified electrician if in doubt.
NOTE: Parts furnished will allow
you to install your fan at up to a
35º angle. Angles greater than 35º
will require a 45º angle adapter (see
dealer).
NOTE: “J” Hook installation is a
Canadian requirement only.
Step 6 - Connecting Wires
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire Connectors (S5) are provided
for your convenience.
2. After connections
are made, turn
splices upward
and push carefully
into outlet box.
Separate black wire on
one side of the box, and
white and green wires
on the other side.
There are 3 colored
wires coming from the
top of the motor
(including ground wire).
Step 7 -
Attaching Canopy
Attach canopy (#3) to the mounting
bracket by placing screws (S2) into
slot in canopy. Twist clockwise to
lock into place. Tighten screws
firmly. Attach canopy decorative
cover (11) to the canopy (3).
Fan
Safety Cable
Green
Ground Wire
Support Beam
Outlet Box
“J” Hook (S8)
Outlet Box (A)
Ceiling
Mounting Bracket (1B)
Zip Tie (S9)
“J” Hook (S8)
White (Neutral)
Ground
Canopy (3)
Black (Power)
Black
White
Wire
Connectors
(S6)
Ground
(Green)
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
Wire Connections
Outlet Box
Black
Green
White
Black (Hot wire for fan)
Green (Ground Wire)
White (Neutral Wire)
Fan Wires
