2-6 Using the Projector
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1439 Saved date: 05/17/004:43 PM File Name: Ch02
4. To make a selection from the level 2 menu, press the
Minus
(-)
button to scroll down the level 2 menu, or press the
Plus
(+)
button to reverse the scroll direction.
5. Highlight the selection and press the
Select
button to confirm
the selection. The level 3 menu displays.
6. Level 3 for
Position
functions display the adjustment scales.
Use the
Minus
button to decrease and the
Plus
button to
increase the screen Horizontal and Vertical positions.
✎
Some menu functions display adjustment
scales in the level 2 menu, while others
display adjustment scales in the level 3
menu.
7. After making the adjustment, select
Save and Return
.
To void
any changes made, select
Cancel
instead of
Save and Return
.
8. To exit from
the on-screen menu, select
Exit
from the Main
menu. If the display is a second or third-level menu, select
Save
and Return
or
Cancel,
then select
Exit
from the Main menu.
Explaining Functions in the Analog On-Screen Menu
■
Brightness and Contrast—Adjusts the displayed image
brightness and contrast ranges from 0 to 100.
✎
An example of a standard setting is to set
the contrast level to 67 and the brightness
level to 50.
■
Position—Fine-tunes the horizontal and vertical positions of the
display.
■
Zoom—Magnifies an image up to a factor of 32 on the
projection screen (zooms in to a specific area on the screen, and
pans left, right, up, and down).
■
Keystone—Adjusts image distortion at the top and bottom
widths of the screen caused by tilting the projector.
■
Picture—Adjusts the gamma value or degree of contrast of
darkness or light for the projected image.
