• To avoid electrical shock, do not open the case of this product.
• Do not stamp fingerprints on the lens.
• Operate this product using only the recommended AC Power supply.
• Do not overload electrical outlets or extension cords; this can result in fire or electric
shock.
• Keep this product away from strong magnetic fields.
• Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
• Do not change or modify this product, the warranty will be voided.
• Weatherproof (IP67)
• 1/3” Sony Super HAD CCD
• High Resolution 550 TV Lines (Color), 600 TV Lines (B/W)
• True Day/Night (Built-in ICR: IR Cut Filter Removal)
• 3D DNR (Digital Noise Reduction) with 3D filter
• D-WDR (Digital Wide Dynamic Range)
• 3-Axis Gimbals Bracket
• Total 33 Infrared LEDs with a CDS sensor
• Up to 100’ IR range (depends on scene reflection)
• DC Auto Iris Vari-focal Lens (2.8-12mm)
• Dual Voltage(AC 24V/DC 12V)
1. Loosen the locking screw① with the provided hex-head wrench and turn the locking
ring② counter-clockwise to remove the transparent dome③.
2. Attach the camera base④ to the wall or ceiling, wherever you want to install the
camera. Locate a wall stud or ceiling joist and secure the camera base④ using the
supplied screws⑤.
3. How to set angle of view:
- Loosen the screws⑥ for tilting and adjust the camera direction by moving the
camera body⑧ up or down, then fix the screws firmly.
- Turn the mounting bracket (metal part) covering the camera body⑧ left or right for
panning adjustment.
- Loosen the locking knob⑦ and turn the camera body⑧ clockwise or counter-
clockwise to upright images on the screen.
PRECAUTIONS
FEATURES
INSTALLATION
