CONNECTING PHONES: MULTI-LINE PHONES
Call Handling:
TalkSwitch extensions 111, 112, 113, and 114 are all wired to the four line
phone. When a call is transferred to extension 111, line 1 on the phone
will show as active; similarly calls on extension 112 will show line 2 as
active etc.
Through the software, you may configure each incoming line to ring any
given number of extensions, including all the extensions. However, be
careful if incoming line 1 is configured to ring extensions 111, 112, 113,
and 114. An incoming call will ring all four phone lines (lines 1 through 4)
at the same time. Instead configure incoming line 1 to ring extension 111,
line 2 to ring extension 112, etc.
WWW.TALKSWITCH.COM 7
CONNECTING PHONES, FAXES AND DEVICES TO TALKSWITCH
E1 E2 E3 E4
TalkSwitch Jacks
Incoming
Phone Lines
Extensions 111, 112, 113, & 114
4 Line Phone
Line Splitter
Line Splitter
RJ-11 Cord
2 line (4 wire) male to male connector
RJ-11 Coupler
2 line (4 pin) female to female connector
Line Splitter
L1 and L2 are single line (2 pin) female connectors
that join to a two line (4 pin) male connector. A4
pin female receptical will indicate thatyou have a
duplexer and not a line splitter.
