AXIS 2110 User’s Manual Installing Your Camera on a Network
11
Network Indicator
Power Indicator
❸ Connect an Ethernet cable
Connect an Ethernet cable to your AXIS 2110
and attach it to the network.
❻ Exit ping and check the installation
The installation is now complete, and you are ready to access the
AXIS 2110 from your browser, as described in the next section.
❹ Attach the external Power Supply
Attach the power cable to the unit and
connect it to your local mains supply.
❺ Wait for ARP reply and check Network indicator
Approximately 10-15 seconds after connecting the
power supply, the message ‘
Reply from
172.21.1.200...
’ - or similar, is returned in the window.
Ensure that the Power Indicator is permanently lit and
that the Network Indicator flashes intermittently.
