dvanced Guide
> Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amt. as an example.
Note
The * (asterisk) on the LCD indicates the current setting.
1.
Make sure that the machine is turned on.
2.
Press the
Menu
button repeatedly until Device settings appears.
When you change the fax settings, press the
Menu
button repeatedly until Fax settings appears in
the copy mode or the fax mode.
3.
Use the button to select Print settings, then press the
OK
button.
4.
Use the button to select Extended copy amt., then press the
OK
button.
5.
Use the button to select a setting item, then press the
OK
button.
Fax settings
Print settings
dvanced settings
Mobile phone settings
Bluetooth settings
PictBridge settings
Reset setting
Page top
Page 682 of 817 pagesChanging the Machine Settings on the LCD
