Basic Printing
4
2
Prepare to load paper.
3
Load the paper.
Note
z Do not stack more than 10 sheets in the paper output slot
cover.
z Do not touch the printed surfaces until the ink dries. For
specific drying times, refer to the instructions packaged
with your media.
(1) Open the paper rest
and output slot cover.
(2) Move the paper thickness lever to
the correct position for the media
in use.
Move to the right position for plain
paper. Move to the left postion for
envelope, and T-Shirt Transfers.
(2) Align the paper stack
against the right side of
the sheet feeder.
(3) Slide the paper guide
against the left side of the
stack of paper.
Load Limit Mark
Load Limit Mark Load Limit Mark
Load Limit Mark
Do not load beyond
this Load Limit Mark.
(1) Insert the paper into the
sheet feeder with print
side facing up.
US_i70_QSG.book Page 4 Monday, December 16, 2002 5:48 PM
