A SERVICE OF

logo

Routine Cleaning
7-51
7
Routine Maintenance
Platen Glass and Underside of the Feeder
Clean the platen glass and the underside of the feeder by following the procedure
below.
IMPORTANT
If the platen glass or the underside of the feeder is dirty, the original may not be scanned
clearly, or the size of the original may be detected incorrectly.
1
Clean the platen glass and the underside of the feeder with a
cloth dampened with water, and then wipe them clean with a
soft, dry cloth.
CAUTION
Do not dampen the cloth too much, as this may damage the original or
break the machine.