8-6 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
Set this mode if you only have one telephone line that you use mainly for voice calls,
and only occasionally to receive faxes.
For this mode, you will need to connect the optional handset or a telephone to your unit
to be able to receive voice calls and also to manually activate reception of documents.
You can activate reception directly from your unit, or if your telephone is located away
from your unit, you can dial the remote receiving ID on the telephone to activate
reception (this is called Remote reception).
Setting MANUAL MODE
Follow this procedure to set the receive mode to MANUAL MODE:
1 Press Receive Mode repeatedly until
MANUAL MODE is displayed.
• After a few seconds, the LCD changes
Ex:
to this display:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1 Make sure Manual is displayed in the
Ex:
LCD (1 above).
2 Make sure you have connected the
optional handset or a telephone to
your unit (1 p. 2-7).
3 When you hear the optional handset
or telephone ring, pick up the handset.
■ If you hear a long beep tone or silence:
4 Someone is trying to send you a fax.
Press Start/Copy on your unit and
hang up to begin receiving the
document.
• If you are using the telephone and it is
located away from your unit, dial 25 (the
default remote receiving ID) on your
telephone and hang up.
12/27 Manual
12/27 Manual
MANUAL MODE
