70 SNMP Management ELS100-24TXG
Table 5-3. Port Variables
Compiling MIB Extensions: Cabletron Website
The MIBs supported by the ELS100-24TXG switch must be compiled into
the SNMP network management platform before the switch can be
managed. The supported MIBs are available using Cabletron’s website
at:
http://www.cabletron.com
The four standard MIB specifications listed above with which the
ELS100-24TXG switch is compliant are generally available with the
SNMP management platform.
Application modules specific to managing the ELS100-24TXG switch
under different network management platforms are available. Contact
Cabletron Systems for information regarding supported platforms.
Variable Description
PortId Port number or ID.
PortStatus Link status of the port.
PortDuplexStatus Full/half duplex setting of the port. Not configurable
if auto-negotiation is enabled.
PortName Text name assigned to the port.
PortEnable Enable/disable status of the port.
PortSpeed Speed the port is operating at. Not configurable if
auto-negotiation is enabled.
PortAutonegEnable Enable/disable auto-negotiation on the port.
PortFlowControlEnable Enable/disable flow control on the port.
PortType The type of port, either: 10Base-T, 100Base-TX,
1000Base-SX, 1000Base-LX, or 1000Base-CX.
