Chapter 5: Local Management
5-72 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5.23 HIGH SPEED INTERFACE CONFIGURATION MENU
SCREEN (DLE2X-MA ONLY)
Access the High Speed Interface Configuration Menu screen from the
Module Specific Configuration Menu screen by using the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION
MENU menu item and pressing ENTER. The High Speed Interface
Configuration screen displays.
The High Speed Interface Configuration screen displays the types of
interfaces installed in ports 25 and 26, their current operating mode, and
indicates if the ports are linked. This screen also allows the user to enable
or disable Auto-Negotiation and set the Advertised Ability.
When the
HIGH SPEED CONFIGURATION MENU
is selected
for the DLE3X-MA the applicable HSIM Setup screen displays.
Refer to the HSIM User’s Guide to set operating parameters for
the HSIM installed in the DLE3X-MA.
The High Speed Interface Configuration screen, Figure 5-28,
applies only to ports 25 and 26 of the DLE2X-MA. This screen
supports the DELTX-UI, DELFX-UI and DELF3-UI Fast
Ethernet Interface Modules that operate at 100 Mbps. If you
are configuring a DLE3X-MA, refer to the applicable HSIM
User’s Guide, or proceed to Section 5.24.
