9F426-02 Module Specific Information
4
FNB Resource Configuration Screen Fields
The following information briefly explains each FNB Resource Configuration
Screen field.
Current FDDI Con
Displays the current connections of the selected module to the SmartSwitch 9000’s
FNB.
Config ID
Displays an identification number that is automatically assigned to each
configuration.
FDDI Connections
Displays all possible connections of the selected module to the SmartSwitch
9000’s FNB (For a description of each of these connections, refer to Table 2).
Changing the Current FNB Connection
To change the current FNB connection:
1. Use the arrow keys to highlight a desired FDDI connection.
2. Press the
Return
key.
3. The connection you selected appears in the
Current FDDI Con
field.
4. Use the arrow keys to highlight
SAVE
at the bottom of the screen and press
the
Return
key.
The message “SAVED OK” appears. This message indicates that the FNB
connection you selected has been implemented. If you exit without saving, the
message “NOT SAVED -- PRESS SAVE TO KEEP CHANGES” appears. If you
proceed to exit without saving, the FNB connection you selected will not be
implemented.
5. Use the arrow keys to highlight
RETURN
and press the
Return
key.
