TeraStation User Manual 126
Disks
Remove Disk To remove a hard disk, select the disk you want to disconnect and click [Remove Disk]
Rediscover Disk After performing the procedure to remove the hard drive, taking it o physically, and
replacing to another hard drive, click here to have the TeraStation recognize a drive again
without restarting the unit.
RAID Array
RAID Array This is displayed when clicking the name on the RAID array Screen.
If you have not set RAID, you can select from [RAID5], [RAID1], [RAID10], and [RAID0] for TS-
XL and TS-XEL series TeraStations, [RAID1] and [RAID0] for TS-WXL series TeraStations. If you
do not select from any of the above, the unit is used as a normal mode (4 hard drives).
[Disk Structure]:
Displays the hard drives that consist of RAID. To congure RAID, check the hard drives you
are going to use, select RAID mode, and click [Create Raid Array].
• To congure (build) RAID1, click 2 drives you are going to use and insert check marks.
• To congure (build) RAID10 and RAID0, click all drives and insert check marks.
* TS-WXL series TeraStations cannot be set to RAID10.
• To congure (build) RAID5, click all drives or 3 drives you are going to use and insert check
marks.
* TS-WXL series TeraStations cannot be set to RAID5
• When delete RAID composition, click [Delete RAID Array].
* Changing or deleting RAID settings will erase all data in the hard drive. Back up your
important data before performing any operations described above.
* If you have a hard drive in the normal mode while building RAID5 (3 hard drives) or RAID1,
it can be set as a spare by clicking [ Set to spare-disk]. If it has already set to a spare drive,
click [Set to normal disk] to set it to the hard drive in the normal mode.
* [ Set to spare-disk] will not be displayed on TS-WXL series TeraStations.
