Tuning The Amplifier - Subwoofer(s)
9
Tuning The Amplifier - Subwoofer(s)
4) Crossover Control
Move the selector switch to “LP” (refer to the diagram on page 3). In this
setting, lowpass signal is sent to the speaker outputs. Experiment with the
crossover point settings while the subwoofer is active. A higher setting will
increase the perceived output, and a lower setting will make the bass
response more omnidirectional.
5) Q-Tune
™
Control
Once the crossover point has been determined, you may choose to use Q-Tune
™
to
increase the bass information. Q-Tune will offer a +6dB bass boost centered at 45Hz
which can be beneficial if more low bass output is desired. To engage Q-Tune move
the selector switch to the “ON” position (refer to the diagram on page 3).
6) GTA-RSL Control
The remote level control (GTA-RSL) gives you independent level adjustment of the
subwoofer’s output level beyond the standard system volume control. Please refer
to the RSL’s manual for installation instruction. The GTA-RSL is available separately,
please consult your authorized Boston Acoustics dealer.
Connection Diagram:
ring a Subwoofer (80Hz Lowpass)
