EN
|
29
Bosch Security Systems | 20 January 2004
DVAS | Instruction Manual | RAID Menu
8.5 Map Volume
Although this page is functional, it is recommended to use the Quick Config page.
To be accessed, each volume must be mapped to a LUN on at least one host channel. If you failed to map a
volume when it was created, or want to change the mapping, use this page.
Use the drop down menus for each volume to select the LUN for each Host Channel. A maximum of eight
LUNS can be applied per channel. Selecting UNMAPPED causes inaccessibility of the selected LUN over that
channel. Click Save Settings to confirm changes.
Changes are made immediately, so changing the LUN of a volume already in use could create a problem with the DVR.
8.6 Rename Volume
This page is used to supply a user-friendly name for a volume.
To change the name of a volume, simply type the new name into the text box and click Save Settings to
continue.
Figure 32 Mapping Logical Volumes
Figure 33 Renaming a Volume
