![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/2a/32ad7371-2640-425d-abcb-757aa2b69a98/32ad7371-2640-425d-abcb-757aa2b69a98-bg7.png)
32
Switching on by inserting a CD
If there is no CD in the CD compart-
ment when the car radio is switched off,
➮ press the button 9.
This flip/release panel then opens.
➮ Without exerting any force, slide
the CD into the compartment, print-
ed side uppermost, until you feel
some resistance.
The CD is automatically drawn into the
drive.
Do not hinder or assist the drive as it
draws the CD in.
➮ Press the flip/release panel gently
until you feel it slot into place.
The car radio switches itself on and CD
playback begins.
Switching on/off
There are various ways of switching the
car radio on and off, as described be-
low.
Switching on/off using the ignition
If the car radio is correctly connected to
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮ To do so, press the button 3.
Note:
● To protect the vehicle battery, the
unit switches off automatically after
one hour.
Switching on/off using the flip/
release panel
➮ Remove the flip/release panel.
The unit switches itself off.
➮ Replace the flip/release panel once
more.
The car radio is switched on. The last
settings (radio, CD, CD changer or AUX)
are activated.
Switching on/off using the button
3
➮ To switch the unit on, press the but-
ton 3.
➮ To switch the unit off, hold the but-
ton 3 down for more than two
seconds.
The car radio is now switched off.
SWITCHING ON/OFF