55
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching Loudness
On / Off
Loudness refers to boosting the bass
and treble at low volume levels to match
the ear’s sensitivity.
➮ Press the AUD/LD button = for
about two seconds.
If loudness is switched on, LD shows in
the display.
Setting Loudness Intensity
The loudness boost can be set in steps
from one to six.
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button : until
“LOUDNESS” appears in the dis-
play.
➮ Press the or button : to ad-
just the boost.
➮ Press the MENU button 8 or OK
;.
Equalizer
This device has a parametric digital
equalizer. In this case, parametric
means that in each of the five filters, one
individual frequency can be emphasised
or reduced (with a gain of +8 to -8).
The following filters are available:
● SUB LOW EQ 32 - 50 Hz
● LOW EQ 63 - 250 Hz
● MID EQ 315 - 1,250 Hz
● MID/HIGH EQ 1,600 - 6,300 Hz
● HIGH EQ 8,000 - 12,500 Hz
These filters can be set without using
any measuring instruments. You can use
them to make a significant difference to
the properties of the sound in the vehi-
cle.
Adjustment Instructions
For the purposes of this adjustment, we
recommend you use a cassette you
know well, or a CD if a CD changer is
connected.
Before making any adjustments to the
equalizer, set the tone and volume con-
trols to zero and deactivate loudness.
For more information on this, read the
section on “Tone and volume controls”.
➮ Listen to the cassette or CD.
➮ Assess the sound you hear.
➮ Now consult the “Equalizer Adjust-
ment Guide” table for “Sound Qual-
ity”.
➮ Adjust the equalizer values as de-
scribed under “Action”.
EQUALIZERLOUDNESS
