27
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮ To switch off the equalizer, hold down
the DEQ button 6 until “DEQ OFF”
briefly appears.
Adjusting the equalizer
➮ Press the DEQ button 6.
➮ Select the “LOW EQ”, “MID EQ” or
“HIGH EQ” filter with the
or button
7.
➮ To select the frequency, press the or
button 7.
➮ Adjust the level with the or key 7.
➮ In order to select the next filter, first
press the OK button 5 then the
or
button 7.
➮ When you have completed all the set-
tings, press the DEQ button 6.
Adjusting the sharpness of the
filter
➮ Press the DEQ button 6.
➮ Select the adjustments for the sharp-
ness of the individual filters “LO-Q-FAC”,
“MI-Q-FAC” or “HI-Q-FAC” with the
or
button 7.
➮ To adjust the sharpness of the filter,
press the
or button 7.
➮ In order to select the next filter, first
press the OK button 5 then the
or
button 7.
➮ When you have completed all the set-
tings, press the DEQ button 6.
Selecting the tone preset
You can choose preset tone settings for the
following musical styles.
● ROCK
● DISCO
● JAZZ
● CLASSIC
● VOCAL
Settings for these styles have already been
programmed.
➮ Press the DEQ button 6.
➮ Select “PRESET” with the or button
7.
➮ To select the preset tone, press the or
button 7.
➮ Press the OK button 5.
➮ When you have completed all the set-
tings, press the DEQ button 6.
Level meter / Spectrometer
While you set the equalizer, the level meter in
the display gives you a symbolic indication of
volume and settings.
At other times, the level meter can be
switched to spectrometer display mode.
Switching the spectrometer on and off
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the or button 7 as often as
is necessary for “PEAK ON” or “PEAK
OFF” to appear in the display.
➮ Press the or buttons 7 in order to
switch the spectrometer on or off.
➮ Press the OK button 5 or the MENU
button 8 to leave the menu. The set-
tings are then saved.
EQUALIZER
