45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning tracks (SCAN)
You can briefly listen in to all the tracks
on a CD.
➮ Hold down the OK button ; for
more than two seconds. The next
track starts to play.
Note:
The scanning time is adjustable. Read
about setting the scanning time in the
section “Setting the scanning time” in
the chapter “Radio mode”.
Stopping SCAN and continuing
playback
➮ Press the OK button ; to end
scanning.
The current track will then continue to
play.
Repeating a track (REPEAT)
➮ If you would like to repeat a track,
press button 4 RPT >.
“REPEAT TRCK” appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
➮ If you would like to end repeat,
press the button 4 RPT > once
again.
“REPEAT OFF” appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.
Interrupting play (PAUSE)
➮ Press the button 1 >.
“PAUSE” appears on the display.
Ending Pause
➮ Press the button 1 > during the
pause.
Play then resumes.
Changing the display
➮ To alter the display between track
number and time or track number
and playing time or track number
and CD name, press the
/ DIS
7 button once or several times for
more than two seconds until the
desired elements appear on the
display.
Traffic announcements in CD
mode
➮ If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAF ? button.
Traffic announcement priority is active
when the traffic-jam symbol lights up on
the display. Please see the chapter “Traf-
fic information”.
Naming CDs
To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 30 CDs. The
names should have a maximum of eight
digits. If you attempt to allocate more
than 30 names, “FULL” will appear on
the display.
CD MODE
