BLADEOS 6.3 Application Guide
12 BMD00178, April 2010
7. When you see the following message, change the Serial Port characteristics to 9600 bps:
8. Press the Escape key (<Esc>) to re-display the Boot Management menu.
9. Select 3 to start a new XModem Download. When you see the following message, change the
Serial Port characteristics to 115200 bps:
10. Press <Enter> to continue the download.
11. Select the OS Image to download. The XModem initiates the file transfer. When the download is
complete, a message similar to the following is displayed:
12. Select the image number to load the new image (1 or 2). It is recommended that you select 1.
A message similar to the following is displayed:
13. When you see the following message, change the Serial Port characteristics to 9600 bps:
14. Press the Escape key (<Esc>) to re-display the Boot Management menu.
15. Select 4 to exit and boot the new image.
## Switch baudrate to 9600 bps and press ESC ...
## Switch baudrate to 115200 bps and press ENTER ...
yzModem - CRC mode, 27186(SOH)/0(STX)/0(CAN) packets, 6 retries
Extracting images ... Do *NOT* power cycle the switch.
**** Switch OS ****
Please choose the Switch OS Image to upgrade [1|2|n] :
Switch OS Image 1 ...
Un-Protected 27 sectors
Erasing Flash.............................. done
Writing to Flash..............................done
Protected 27 sectors
## Switch baudrate to 9600 bps and press ESC ...
