Bil-Jax et 4000 Manual

A SERVICE OF

next previous

TRAILER HITCHING

4

Hook Up the Trailer

1. Raise trailer and lift ball latch.

2. Line up ball with hitch.

NOTE: The trailer hitch uses a 2 inch ball.

3. Lower hitch onto ball and close ball latch.

4. Raise and secure jack.

NOTE: Trailer frame should be level when hitch

is on ball. Adjust height of tow bar as needed.

Always raise and pin the jack before towing.

5. Hook safety chains and attach breakaway

cable.

6. Connect and check trailer lights.

Always cross safety chains below tongue.

Safety chains must hold tongue up if hitch fails.

Always check the tail lights and brake lights

before towing.