
29261 2
Rev. B 0204
To Fasten Hooks
Slip the two hooks together at right
angles to each other.
Turn one hook until they hook
to each other.
To secure the hooks , pull them
against each other until they click
into position.
To Release Hooks: Turn one hook until it is at right
angles to the other and pull apart.
Step Three
Slide the cover over the seat bottom with the opening in the
side of the cover over the seat back release lever. Release the
seat back and tilt the seat forward. Unhook the security cord
and thread it through the end of the flap. Hook the ends of
the cord together. If necessary for a smooth fit, tighten the
cord by tying a knot and tuck in any loose fabric.
Unhook Security Cord and
Thread through Flap - Reattach
Hook ends
together
Cord length may be adjusted
by tying additional knots to
pull fabric up tighter
Tuck Fabric behind
Mechanism Cover
Security Cord around and
under Mechanism Cover
Slip opening
over lever
Reinstall Headrest
Fasten Hook and Loop
Strips
Step Four
Locate the hook and loop strips sewn to the cover on
side of the seat toward the center of the vehicle. Fasten
the strips to each other.
Reinstall the headrest.
LIMITED WARRANTY
We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been normal use and proper mainte-
nance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair or replacement of any item or items found by the
factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items
returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our
products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this
warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “SOFT GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMARILY VINYLS, PLASTICS, AND/OR FOAM):
ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME
DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For further information or request for warranty work, please contact: Bestop Inc.
Customer Service
(800)845-3567
(303)465-1755
*All or a portion of this product may be made in China.