32
N Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9
10
5
ALTERNATE SETUP METHOD
1. User Name – Enter the user name. (Assigned by your ISP).
2. Password – Enter your password. (Assigned by your ISP).
3. Retype Password – Confirm the password. (Assigned by your ISP).
4. Service Name (Optional) – A service name is rarely required by an
ISP. If you are not sure if your ISP requires a service name, leave
this blank.
5. IP assigned by ISP
1) For the Dynamic IP connection – Select “Yes” if your ISP
instructed you to use Dynamic IP.
2) For the Static IP connection – Select “No” if your ISP
instructed you to use Static IP.
– IP Address – Enter an IP address assigned by your ISP for the
Router WAN interface.
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to
access the network of your ISP for connecting to the Internet. PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK.
Select PPPoE or PPPoA and click “Next”. Then enter the information provided by your ISP, and click “Apply Changes” to activate your settings.
