58
G Wireless Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
UsingtheWeb-basedadvancedUserinterface
Setting WPA/WPA2
4. Click “Apply Changes” to finish. You must now set all clients to match
these settings depending on the type of access you want them to
have.
Guest Access
The guest pre-shared key allows guest users an Internet-only access to
restrict them from entering your network and having access to files on
your PCs. Enter your pre-shared key for guest access. This can be from
eight to 63 characters and can be letters, numbers, or symbols. Click
“Apply Changes” to finish.
1. Select “WPA/WPA2-Personal (PSK)” from the “Security Mode” drop-
down box.
2. Select “WPA-PSK” for just WPA authentication, or “WPA2-PSK” for
just WPA2 authentication, or you may select “WPA-PSK + WPA2-
PSK” for WPA and WPA2 as the authentication type.
3. Enter your pre-shared key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must
be used on all of the clients that you set up. This pre-shared key
will allow users full access to your network including shared files
and printers.
