Changing general settings
78
Customizing the telephone
Line / off-hook
You can automatically seize an external line whenever you lift the receiver. You then
never have to dial the external line code.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Line / off-hook menu item. An indication on the right hand side
of the window shows whether the function is on or off.
Switch the function on or off. The new status is displayed.
Exit menu. The new setting is saved.
Note
• If you have switched on "Line/off-hook", you must first press the refer-back key to
make an internal call.
Number of redials
When you activate automatic redial (
→
p. 23): you set here how often the dialling is
to be repeated automatically.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Number of redials menu item. The number of redial operations
currently set is shown in brackets.
If necessary, press several times to select the desired number of redials.
Exit menu. The new setting is saved.
Note
• You can choose between 0, 3, 5 or 10 redials.
• If the setting is "0", the Auto. redial menu item is removed.
