Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 127
Example: 1 – if the slot is empty:
Example: 2 – if there is a module in the slot::
set slot power priority
User level: read-write, admin.
Use the set slot power priority command to configure the power priority
for a slot.
C460-1> set slot power admin 4 up
slot 4 power is enabled
C460-1> set slot power admin 4 down
slot 4 power is disabled
C460-1> set slot power admin 4 up
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Module in slot 4 is shutting down.
Attaching network interface lo0... done.
Welcome to C460
SW version 1.0.1
Login:
C460-1> set slot power admin 4 up
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Module in slot 4 is turning on
Welcome to C460
SW version 1.0.1
Login:
