Avaya, Inc. - 129 - PARTNER ACS 1600 DSL module User Guide
To configure an IP address:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu *
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
D. Display Route Table
2. Select Configure Port IP Address.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
3. Type the number of the port for which you want to
configure an IP address.
The following message (or one similar) displays:
IP interfaces on port 1:
ID IPAddr IPMask Priority
0 255.255.255.0 255.255.255.0 NORMAL
Enter connection to configure:
4. Type the ID number of the connection that you want to
configure (range = 0-7), and then press ENTER.
