- E19 -
2. Insert a tape into the
cassette compart-
ment.
1. Press the FUNCTION button to CD.
RECORDING ---- DECK A ONLY
TO STOP RECORDING
Press the STOP/EJECT button of Deck A.
TO INTERRUPT RECORDING
Press the PAUSE button of Deck A.
To resume recording, press the PAUSE button again.
TO ERASE A RECORDED TAPE
1. Press the FUNCTION button to TAPE.
2. Insert a tape with the side you want to erase fac-
ing you.
3. Press the RECORD button to start erasing.
RECORDING FROM THE CD PLAYER
3. Press the RECORD button
which also engage the
PLAY button.
4. Press the
play/pause
button of the CD player.
REMOTE CONTROL
TO INSTALL BATTERIES
1. Open the battery door.
1) X-BASS button
2) MEMORY button
3) TUNING(
/ )/RANDOM/REPEAT buttons
4) FUNCTION button
5) SLEEP button
6) SKIP/PRESET/MIN / HOUR buttons
7) STOP button
8) PLAY/PAUSE button
USING THE REMOTE CONTROL CORRECTLY
• Point the Remote Control at the REMOTE SENSOR located on the unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE
SENSOR may be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 6 meters (19 feet).
NOTE:
If there is no sound from all the speakers, the MUTE function might have been
activated. To disable the MUTE function, press the MUTE button on the unit and
remote handset.
+
+
2. Insert two R03 (AAA or UM-4)
size batteries.
BATTERY REPLACEMENT
When batteries become weak, the operating distance
of the Remote Control is greatly reduced and you will
need to replace the batteries.
NOTE:
If the Remote Control is not going to be used for a
long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
9) POWER button
10) DISC SKIP button
11) VOLUME UP/DOWN button
12) OPEN/CLOSE button
13) TIMER button
14) BAND button
15) MUTE button
16) STEREO WIDE button
T
U
N
I
N
G
P
L
A
Y
/
P
A
U
S
E
S
T
O
P
D
I
S
C
S
K
I
P
R
A
N
D
O
M
R
E
P
E
A
T
D
O
W
N
U
P
DECK A
DECK A
This side
you want
to record
