I N S TA L L AT I O N
NOTE: This telephone requires a
2-line modular jack or two separate
one-line modular jacks to use this
unit as a two-line phone.
NOTE: To use both lines of a two-
line telephone, your local telephone
company must provide two telephone
numbers.
Batteries
B e fo re using the telep h o n e, yo u
should install AA bat t e ries (not
i n cluded). If you are connecting
o n ly Line 1 or only Line 2, use two
b at t e ri e s , as indicated on the bottom of
the phone. If you are connecting both
l i n e s , use four bat t e ri e s .
You can use the phone without
batteries to make and receive calls,
but it requires batteries to power the
Line Status lights.
If you have wall-mounted the
telephone, follow these directions:
1 Remove the telephone from
the wall.
2 Turn the telephone upside down.
3 Remove the base by pressing the
tabs located on the top of the base.
4 Press down on tab on battery
door located between arrows on
battery door (Figure 2A). Swing
door open and insert new batteries
(Figure 2B).
5 Close the battery door.
C AU T I O N : A lways unplug the line
c o rd befo re installing new AA bat t e ri e s .
