A SERVICE OF

logo

Module Problems
The screen below appears when the busy-out fails again; be sure to specify
the correct slot.
Console Display/Instructions
Additional Information
PC
Busy-Out Slot xx:
xx = slot number entered in
Step
2
Busy-out FAILED
Exit
Reset
Summary
Procedure
Menu
Maintenance
Slot
Dial the slot no.
Enter
Reset
Yes.
PC Procedure
Appropriate Modules
Time Estimate
(F6)
(F2)
Type the slot no.
(F10)
(F7)
(F1)
Any module that you are about to test
Less than 1 second (all calls in progress are
terminated or put on hold immediately). If
you do not want to interrupt calls in progress,
use Busy-Out instead of Reset, as described
above.
To reset the module, follow the steps below.
1 From the Maintenance menu,
select the
Slot option.
Maintenance
Make a selection
System
Slot
Port
Exit
(F2)
4-40 Control Unit Problems