77
APPENDIX B: Tips Before Installation
Before installing DiskMaster , please be aware of some key information regarding
DiskMaster which will help you understand this machine and further operation.
1. 3 Seconds Power ON/OFF control
To avoid faulty power button operation:
- Power ON: Press the power button and hold
for 3 seconds until the power LED turns on.
- Power OFF: Press the power button and hold
for 3 seconds until the power LED turns off.
2. DHCP client only in the LAN
DISKMASTER is designed to be a DHCP client in the LAN and is set to “Auto”
mode by default, eliminating Users having to input an IP Address manually.
3. Default IP: 192.168.1.251:6666
If the DHCP server is not present or if DISKMASTER is connected to the PC
directly:
- Factory Default IP is 192.168.1.251 using the access port 6666.
- Web management: http://192.168.1.251:6666
4. Default Web Management (UI) system account and password
- Factory Default ID: sysadmin
- Factory Default PW: atlantis
5. Default SAMBA/FTP system account and password
- Factory Default ID: sysadmin
- Factory Default PW: atlantis
6. Disk Maximun Support
DISKMASTER can be fitted with 2 HDDs. These 2 HDDs can be configured to
operate as Normal, Raid 0, or Raid 1. For a single drive, the maximun HDD
capacity acknowledged by system is 2TB.
