A SERVICE OF

logo

Open as PDF
next previous
Chapter 3. Local Operation
23
Set Serial Port
To configure the VM1616T’s serial settings, select Set Serial Port from the
Menu.
The submenu provides four options: Serial Port Address; Baud Rate; Serial
Port Mode; and Default Serial Settings, as follows:
Serial Port Address
To set the VM1616T’s serial port address, do the following:
1. Select Serial Port Address from the Set Serial Port submenu. The cursor
flashes on the entry:
2. Use the In dial and turn it clockwise (ascending from 0, 1, 2 .... 15) or
counterclockwise (descending from 0, 15, 14.... 1) to select a number.
3. Press In/Out/Enter to confirm your selection.
Note: The default serial port address is 0.
Set IP Port
Set Serial Port
Serial Port Address: 0
Baud Rate: 19200