A SERVICE OF

logo

Chapter 2. Hardware Setup
13
Rack Mounting
The KH2508A / KH2516A can be mounted in a 19" (1U) rack. The mounting
brackets can screw into either the front or the back of the unit so that it can
attach to the front or the back of the rack. To rack mount the unit:
1. Remove the screws at the front or the rear, as shown in the diagram below.
2. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
3. Slide the unit into the front or rear of the rack and secure it to the rack.
Philips hex head
M3x6
Philips hex head
M3x6
Philips hex head
M3x8
Philips hex head
M3x8