Chapter 3. OSD Operation
27
(Continued from previous page.)
(Continues on next page.)
Setting Function
EDIT PORT
NAMES
To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names. To Edit a port
name:
1. Click the port you want, or use the Navigation Keys to
move the highlight bar to it, then press [Enter].
1. Key in the new Port Name, or modify/delete the old
one. The maximum number of characters allowed for
the Port Name is 12. Legal characters include:
All alpha characters: a - z; A - Z
All numeric characters: 0 - 9
+ - / : . and Space
Case does not matter; the OSD displays the Port Name in
all capitals no matter how they were keyed in.
1. When you have finished editing, press [Enter] to have
the change take effect. To abort the change, press
[Esc].
RESTORE
DEFAULT
VALUES
This function is used to undo all changes and return the setup to
the original factory default settings (see OSD Factory Default
Settings, page 49) - except for the Names settings that were
assigned to the Ports, which are saved.
CLEAR THE
NAME LIST
This function clears the port name list.
ACTIVATE
BEEPER
Choices are:
Y (for Yes), or
N (for No).
When activated, the beeper sounds whenever a Port is changed;
when activating the Auto Scan function (see F7 SCAN, p. 32); or
an invalid entry is made on an OSD menu. The default is Y
(activated).
