23
21017651 9 1210 114 1360 Axle Spacing
21019555 9 1210 114 1360 Axle Spacing, Underslung – convert from 21017651
21023701 9 1175 114 1360 Axle Spacing, Tri-Axle Centre Spring
21201289 9 1210 129 1360 Axle Spacing
21209244 9 1175 129 1360 Axle Spacing, Tri-Axle Centre Spring
21211383 9 1210 129 1360 Axle Spacing, Underslung – convert from 21201289
21017682 10 1210 127 1360 Axle Spacing
21017798 10 1210 127 1360 Axle Spacing, Underslung – convert from 21017682
21200067 10 953 111 1100 Axle Spacing
21200068 10 902 111 1100 Axle Spacing, Tri-Axle Centre Spring
21200284 10 1175 127 1360 Axle Spacing, Tri-Axle Centre Spring
21203522 10 1213 143 1360 Axle Spacing
21220527 10 1213 143 1360 Axle Spacing, Underslung – convert from 21203522
21203636 10 1182 143 1360 Axle Spacing, Tri-Axle Centre Spring
21220528 10 1182 143 1360 Axle Spacing, Underslung – convert from 21203636
21024588 11 933 96 1080 Axle Spacing – low camber spring
21203869 11 889 96 1080 Axle Spacing, Tri-Axle Centre Spring – low camber spring
21203629 11 1213 157 1360 Axle Spacing
21203630 11 1182 157 1360 Axle Spacing, Tri-Axle Centre Spring
21203610 11 1213 157 1360 Axle Spacing, Underslung – convert from 21203629
21203611 11 1182 157 1360Axle Spacing, Underslung – convert from 21203630
21025427 12 1210 152 1360Axle Spacing
21211035 12 1210 152 1360Axle Spacing, Underslung – convert from 21025427
21202467 12 1175 152 1360Axle Spacing, Tri-Axle Centre Spring
21211036 12 1175 152 1360Axle Spacing, Underslung – convert from 21202467
No. of Length Thickness
Part No. Leaves mm mm Comments
Warranty
A comprehensive network of original parts distributors and service stations operate throughout Europe; this is supported internationally with agents strategically
placed around the world.
All Meritor replacement parts obtained through original parts distributors are covered by a one year warranty.
For full warranty terms and conditions see ‘Meritor Warranty Terms and Conditions’ Publication No 4.84.1
Meritor reserve the right to make changes in specifications shown herein or add improvements at any time without notice or obligation.
PARTS SHOWN IN THIS SPARES LIST ARE MADE FROM DRAWINGS IN WHICH COPYRIGHT SUBSISTS. THE MAKING OF COPIES OF ANY OF THESE PARTS IS
PROHIBITED.
© Meritor HVS Limited
The high quality assurance management systems applied by Meritor are endorsed with the awarding of ISO 9001, Lloyd’s Register Quality Assurance.
