A SERVICE OF

logo

© 2005 Alamo Group Inc.
1-18
MACHETE
This document does not authorize the repair or replacement of parts under warranty
TECHNICAL INFORMATION BULLETIN No. 032697
Alamo Industrial ™ Technical Services Department
1502 East Walnut
Seguin, Texas 78155
830-372-2708
Models: Machete, MB21 & MB24
Date:
Mar. 26, 1997
Bulletin No:
032697
King Pin and Boom Pin Bushing Drivers Available:
It is now possible to obtain the proper bushing driver to facilitate the installation of all bushings
on the Machete Boom Assembly. The Large Driver (P/N 02972281) is used to install the King Pin
Bushings in the frame, while the Small Driver (P/N 02972282) should be used to install all the
bushings in the boom. These tools may be used to install bushings on several other Alamo Industrial
Models such as Slope Mowera and A-Booms. The proper use of the installation tools will help to
prevent damage to the bushing surfaces during installation.
# 02972281 for driving
2-1/2" ID Bushings
# 02972282 for driving
1-1/2" ID Bushings
Figure 1
Note: Replaces / Same as Bulletin No. 032697A