![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/51/15134533-c991-4729-844d-a386e6a3998e/15134533-c991-4729-844d-a386e6a3998e-bg8b.png)
OPERATION
AXTREME 03/09 Operation Section 3-45
©2009 Alamo Group Inc.
OPERATION
any var
e
o
ec
s, suc
as w
re, ca
e, rope, or c
a
ns, can
ecome en
ang
e
n
e
operating parts of the mower head. These items could then swing outside the housing at
greater velocities than the blades. Such a situation is extremely hazardous and could result
in serious injury or even death. Inspect the cutting area for such objects before mowing.
Remove any like object from the site. Never allow the cutting blades to contact such items.
(SGM-06)
Grass Flail
• The Grass Flail head is rated for cutting grass
only.
• The Grass Flail operates attached to the boom
arm, and is ideal for cutting hard to reach
areas where a smooth cut is required.
• Cutting height ranges from 3/4” to 4” in
vegetation. Cutting height is set by adjusting
the height of the roller assembly.
• When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals with a 100 yards.
Debri tends to fly out at great speed and can
injure or even cause death.
OPS-B- 0040
Flail
• The Flail Brush Cutter is rated to cut material
up to 4” in diameter.
• Setting cutting height ranges from 3/4” to 6”.
Cutting height is set by adjusting the height of
the roller assembly.
• Remove roller assembly when cutting limbs
and other large diameter vegetation (greater
than 2”) to prevent damaging the roller
assembly.
• When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals within a 100 yards.
Debri tends to fly out at great speed and can
injure or even cause death. OPS-B- 0042
any var
e
o
ec
s, suc
as w
re, ca
e, rope, or c
a
ns, can
ecome en
ang
e
n
e
operating parts of the mower head. These items could then swing outside the housing at
greater velocities than the blades. Such a situation is extremely hazardous and could result
in serious injury or even death. Inspect the cutting area for such objects before mowing.
Remove any like object from the site. Never allow the cutting blades to contact such items.
(SGM-06)