A SERVICE OF

logo

Flow Control:
* Displays flow control status active for individual ports.
Two options are available to choose from: <Enable> and
<Disable>. The default mode is <Enabled>. There are two types
of Flow Control supported by Ethernet (Both supported by
Alloy Gigabit Switches):
o Pause flow control:
As stipulated by IEEE standard 802.3x, for full-
duplex operation
o Backpressure:
For half-duplex operation
3.4.1.3. Aggregation
Fi
g
. 3.23
Function Name: Aggregation
Function Display the current setup of Aggregation/Trunking
Description:
Parameter Normal:
Description: * Displays a list of ports that are not participating in any
aggregation/trunking groups
Group 1-8:
* If an aggregation/trunking group(s) has been configured,
displayed by port number. Up to 8 aggregation/trunking
groups can be defined
48