Chapter 2 – Connections
18 NanoVerb Reference Manual
MIXER
LEFT
MASTER
OUT
LEFT INPUT
LEFT
OUTPUT
RIGHT
OUTPUT
RIGHT INPUT
RIGHT
MASTER
OUT
POWER AMP
Using the NanoVerb with a Powered Mixer
You can dramatically improve the sound quality of a powered mixer by connecting a
digital effects units such as the NanoVerb to it in the same way you would connect it
to a regular mixer, with one important note:
J
Never connect an output intended for a loudspeaker (the power amplifier output) to
the input of the NanoVerb. This will cause damage that will not be covered by the
warranty.
Consult the manual of your mixer for more information. Generally, the best way is to
connect the "Effect Out" jack of the mixer to the NanoVerb following the procedure on
page 14. If the system is not stereo, you may connect only the [LEFT] output of the
NanoVerb to an "Effect Return" or other input. You will get a slightly deeper, more
complex effect if you can connect both the [LEFT] and [RIGHT] outputs of the
NanoVerb to inputs on the mixer.
