Battery Removal & Disposal
NOTE: If uncertain as to how to remove your battery pack, we suggest you
take your sweeper to a reputable small appliance service technician to
have this service performed.
Follow these steps when battery removal is required.
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them
properly. When the batteries are no longer good for use, they must be removed from
the sweeper for disposal. Do not remove the batteries for any reason other than
disposal of them. Call your nearest recycling center for information on the
recycling and disposal of Ni-Cd batteries.
Model: CFT25
4.8 Volt DC
WARNING: You must never use ordinary batteries for replacement
as these may leak and cause damage.
Use only battery pack X9725 provided for replacement.
1. Sweeper Power Head
2. On / Off Switch
3. Charging Light Indicator
4. Dust Cup (Container)
5. Rotating Brush
6. Transparent Brush Cover
7. Charging Jack
8. Lower Handle
9. Metal Extension Handles
10. Upper Handle
11. Charging Adapter: Use Only
AD-0815-U8 7,5V-150mA
Removal of Battery Pack
1. Remove the extention handles and dust cup container.
2. Turn unit over so that the base is facing upwards. Be careful not to turn the unit
ON. (Fig. 9)
3. Push in locking tab and lift off battery compartment cover. (Fig. 10)
4. Lift out battery pack and set aside.
5. Insert the new battery pack into unit, ensuring that the Positive (+) terminal of
the battery pack corresponds with the positive (+) making inside the battery
compartment. Replace the battery compartment cover making certain that the
locking tab snaps in place.
IMPORTANT: This appliance contains Ni-Cd batteries. The batteries must be
recycled or disposed of properly.
Fig. 9
Locking
Tab
Fig. 10
Illustrations may differ from actual product.
Important: Cordless Sweeper Model CFT25 is shipped with
the batteries uncharged. Charging of the unit for
20 hours prior to first use is required.
Use replacement battery #
X9725 only.
7
2
