Cingular GPRS Raven User Guide Version 2.01 79
AT Commands
DNS settings in the Raven allow the modem to use domain names instead of IPs to
contact other Internet hosts.
*DBGCOMLVL=n
n=0
n=1
n=2
Set the logging level for the host or module COM port.
No logging
Host COM.
Module COM.
*DBGEVTLOGCLEAR none Clears the content of the logs in the modem.
*DBGIPLVL=n
n=0
n=1
n=2
Sets the logging level for the IP subsystem.
No logging
Log errors (i.e. invalid/corrupt packets, etc.).
Log the header of all received packets. Note that this can
quickly exhaust the event log.
*DBGPPPLVL=n
n=0
n=1-3
Sets the logging level for the PPP stack.
No logging
Enables logging at different levels of detail. (default = 1)
TABLE 11. DNS
Command Parameters Details
*DNSn=d.d.d.d n=1 or 2
d.d.d.d = IP of
domain server
Sets the DNS addresses to be returned during PPP nego-
tiation. If the underlying communications network pro-
vides DNS addresses, they replace those specified by
this command.
*DNS1 and *DNS2 are valid.
*DNSUPDATE=n
n=0
n=1
Indicates whether the modem should send DNS updates
to the DNS server specified by *DNSUSER. These
updates are as per RFC2136. They are not secure and are
recommended only for a private network. In a public
network, the IP Logger services should be used instead.
DNS updates disabled (Default).
DNS updates enabled.
TABLE 10. Logging
Command Parameters Details
