Taking a picture
Press the shutter switch to take a picture.
A high pitched beep indicates that a
picture is taken successfully and the
counter decreases as well. A low beep
indicates insufficient light to shoot. A
series of beeps suggest that the camera is
full.
Switching the camera on / off
Keep pressing SW2 until the LCD is
activated, and the camera turns off after
30 seconds of inactivity. The LCD
indicates "Lr" for low resolution (QVGA
images) and "Hr" for high resolution(VGA
images). The LCD then displays the
number of the remaining pictures. To turn
off the camera, press SW2 for 2 seconds.
Press Sw2
LCD
is activated
Press Sw1 to shoot
@n IP Company
Voice recording
Press the shutter switch until the LCD
changes to indicate "Ar". Then hold the
shutter switch to record sound. To stop
recording, release the shutter switch; to
resume recording, press the shutter switch.
Change mode to "Ar"
"Ar" is displayed
Hold the Sw1 button to record voice,
releasing to stop.
