Shipping Guidelines Follow the steps in Figure 1-3 to return the E1364A Switch Module
to an Agilent Technologies Sales and Support Office or Service Center.
* We recommend that you use the same shipping materials as those used in factory packaging (available from
Agilent). For other (commercially available) shipping materials, use a double-walled carton with minimum 2.4
MPa (350 psi) test.
Figure 1-3. Packaging/Shipping Guidelines
1. Prepare the Switch
• Remove user wiring from terminal module.
• Attach tag to switch that identifies:
– Owner
– Model Number/Serial Number
– Service Required
• Place tagged device in approved anti-static
bag.
2.
Package the Switch
• Place packaged switch in shipping carton.*
• Place 75 to 100 mm (3 to 4 inches) of
shock-absorbing material around the
module.
• Seal the shipping container securely.
• Mark the shipping container FRAGILE.
3.
Ship the Switch to Hewlett-Packard
• Place address label on shipping carton.
• Send carton to Agilent Technologies.
Chapter 1 General Information 15
