Software Utilities
When your system is connected with multiple ADAM-4000 or
ADAM-5000 modules, just click the addresses of the modules to see
relevant information (multiple selection from 00 to FF is allowed). Then
check the Filter option and click Update button to see relevant
information of the modules. Note that the information about other
unselected modules won’t show forth.
5.1.7 Saving module’s Configuration to file
•
Save the input range, baud rate, data format, checksum status
and/ or integration time and Alarm Status for a specified analog
input module.
•
Save the output range, baud rate, data format, checksum status and
slew rate for a specified analog output module.
•
Save the baud rate and checksum status for a digital I/O module.
•
Save the input mode, baud rate, checksum status and/or frequency
gate time, input signal mode, gate mode, alarm status, etc. for a
specified counter/frequency module.
There are three ways to save a configuration file:
1. Click the Toolbar button
2. Click the right mouse button
5-10 ADAM-5000
