September 25, 2006 Chapter 3: Provisioning
LTPE-UM-3159-02 3-13
Trap 1 Community String Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 1 Validation Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Trap 2 IP Address Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Trap 2 Community String Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 2 Validation Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Trap 3 IP Address Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Trap 3 Community String Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 3 Validation Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
System Location Field where you enter the physical location of the
system.
System Name Field where you assign a name to the system.
System Contact Field where you list the name, title, or phone number
of the system operator or administrator.
Option Function
