Requirements For Your System PRELIMINARY
6 Megabit Modem 500L Installation Manual
PR
EL
I
M
I
N
A
RY
REQUIREMENTS FOR YOUR SYSTEM
You need the following hardware and software to complete the installation and configuration of
the Megabit Modem 500L:
• PC with an Ethernet Network Interface Card (NIC)
• TCP/IP network protocol stack (see your documentation for your operating system)
• Web browser installed such as Netscape
®
or Internet Explorer
®
version 4.0 or higher
• Ethernet hub (optional)
REQUIREMENTS FOR THE INSTALLATION SITE
To install the Megabit Modem 500L, you must:
• select a location to install the modems as described in the section “Location for Modem
Installation” on this page
• if you get phone service, identify requirements to connect phones as described in the
section “Phone Service” on page 9
Location for Modem Installation
You can install the modem either:
• placed on a flat surface (shown on page 7)
• mounted on a wall (shown on page 8)
Your facility must have the following minimum site requirements to install each modem:
• power outlet
• RJ-11 wall jack that has DMT ADSL service available
