49
43
4 The right-side numbers indicate
round-back period (min.) for OUT
punch after the end time. In this
case, push the [+] or [-] button to set
at "30". And then, push the [SET]
button. At that moment, the display
will change from flashing to steady.
6 The right-side numbers indicate
grace-forward period (min.) for
OUT punch after the end time. In
this case, push the [+] or [-] button
to set at "20". And then, push the
[SET] button. At that moment, the
display will change from flashing to
steady.
SET
SCHEDULE
Set the " 07 Duration of grace time (start & end shift times)".
5 Next, push the [SET] button again
to set the left-side number at "07"
by pressing the [+] button. Once
you push the [SET] button, flashing
of the display will change to the
middle numbers which indicate
grace-back period (min.) for IN
punch after the start time. In case of
the example, push the [+] or [-]
button to set at "5" and push the
[SET] button. At that moment,
flashing of the display will change
to the right-side numbers.
Range of values: 1-99 min.
(" " makes the function disabled.)
SET
FUNCTION
Program No.
SCHEDULE
SET
FUNCTION
SCHEDULE
Grace time
for ST
SET
FUNCTION
SCHEDULE
Grace time
for ET
SET
FUNCTION
SCHEDULE
