51
English
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorised service center
for assistance. Some problems may be solved using the BIOS Utility.
Error Messages Corrective Action
CMOS Battery Bad Contact your dealer or an authorised service
center.
CMOS Checksum Error Contact your dealer or an authorised service
center.
Disc Boot Failure Insert a system (bootable) disc into the floppy
drive (A:), then press <Enter> to reboot.
Equipment
Configuration Error
Press <F2> (during POST) to enter the BIOS Utility;
then press Exit in the BIOS Utility to reboot.
Hard Disc 0 Error Contact your dealer or an authorised service
center.
Hard Disc 0 Extended
Type Error
Contact your dealer or an authorised service
center.
I/O Parity Error Contact your dealer or an authorised service
center.
Keyboard Error or No
Keyboard Connected
Contact your dealer or an authorised service
center.
Keyboard Interface
Error
Contact your dealer or an authorised service
center.
Memory Size Mismatch Press <F2> (during POST) to enter the BIOS Utility;
then press Exit in the BIOS Utility to reboot.
